| FENCING TOOLS |
|
Single Tier Standard Wire Dispenser. Cat H319
The most convenient
way to un-spool a wire coil for continuous fence construction without tangle
and jamming. Available in spike or Y footing. Adjustable to all fencing wire
sizes, this wire dispenser folds up for ease of carrying in difficult
country.
 |
Wire Strainer. Smooth Grip Chain Grab. Cat H300 Trouble free fence
straining for years and years. Suitable for any diameters 1.6 to 5.0mm wire
fence. Smooth or barbed fence wire.
 |
Clamp Strainer. Cat No. H406 - This Fence Strainer has been especially
designed for straining up all classes of prefabricated fencing.
 |
Hayes EzePull H550 4 in 1 Fencing Tool - When you're serious about farm
fencing. The Hayes EzePull 4 in 1 fencing tool, a versatile, precision tool,
is expertly designed to save you time and effort. With double action
strength for power crimp joining, staple pulling, wire gripping/stripping
and wire cutting for deer, game livestock and exotic animal fence
construction. Ideal conductivity for electric fence joining. .
 |
Permanent In-line Wire Strainer Cat No. H302 - Over the life of a fence,
Hayes permanent wire strainers act to maintain the correct tension to the
fence wires strands, ensuring continuous safe pasture enclosure, and maximum
economic life of the fence investment. They can be adjusted by the use of
the tightening handle or wrench applied to the wheel shaft's bevelled ends.
 |
Hayes Steel Strainer Clamps - Made from steel, designed for quick easy
operation, no nuts and bolts, simple 'hammer-in' wedges. For deer and game
fence use Hayes Cat No. H508S/1.9 (6'), for livestock and top-up fences use
Cat No. H508/1.2 (3'33").
 |
Hayes EzeCrimp H600 Multi-Crimp Tool Cuts-Strips-Crimps - EzeCrimp joins
wire with a choice of 5 crimps - 2.50mm, 3.15mm, 4.0mm plus a 2.50 electric
crimp and 2.50mm standard barb wire crimp. The cutters on the tip allow you
to cut in close.
The stripping notch easily removes electric fence
underground-cable insulation.
 |
Hand Post Knocker or Rammer - Heavy duty Steel 6" diameter for fast and secure driving-in of Fencing Posts.
 |
Selection of rope clips.
 |
POST KNOCKER - King Hitter Post Driver - Designed, developed and
manufactured in New Zealand where land conditions are so variable that true
versatility of performance is an absolute necessity, coupling this with
dedication to well established engineering principles and the knowledge
gained by more than twenty years in the field has produced the KINGHITTER,
it is simply the best !
FEATURES INCLUDE:
5.6 PULLEY RAM MECHANISM -
The result of more than 18 years of continual research and development, this
patented system is totally reliable yet very simple. Finely tuned to provide
sufficient lift with a minimum of displacement ensuring speedy hammer lift
and true free fall. Converts easily to 5 pulley operation to give extra lift
for pilot auger attachment.
FLEX IN MAST -
The masts are welded with low hydrogen rods, ensuring maximum flexibility.
SAFETY POST CAP -
A patented device to securely hold the post being driven and to act as a
safety feature offering 'no hands' post positioning, hands are kept well
free during driving action.
|
